NF1634
High-tack acrylic transfer adhesive on a 60# polycoated kraft liner — no film or fabric carrier. At 115 oz/in peel strength and 200°F service temperature, NF1634 is the highest-performance transfer adhesive in the line. For industrial assembly and gasket fabrication where high peel strength and moderate heat resistance are required without stepping to solvent-based chemistry.
| Adhesive: | Acrylic |
- Foam & Textile Fabrication: Bonding foam and textile substrates at 115 oz/in — the highest-peel transfer adhesive in the line without solvent chemistry; for high-peel foam bonding where acrylic chemistry is compatible.
- Gaskets & Sealing: High-peel gasket bonding at 115 oz/in from a no-carrier transfer adhesive; for gasket applications requiring maximum peel in an acrylic transfer adhesive without stepping to solvent-based options.
- Industrial Assembly: Industrial assembly bonding at 115 oz/in from a transfer adhesive; the highest acrylic-based transfer tape for assemblies requiring maximum peel without a carrier layer.
- Laminating & Converting: High-peel laminating and converting with 115 oz/in transfer adhesive on SCK liner; for converting applications requiring maximum acrylic peel in a no-carrier format.
Are custom widths and short runs available?
Yes. Nova offers custom slit widths and welcomes short runs across the full product line. Most quotes are returned within 24–48 hours. Reach out today to discuss your specific requirements.
When should I use a transfer tape instead of a film-carrier tape?
Transfer tapes are adhesive-only — no carrier film — so the adhesive is invisible once the liner is removed. Use a transfer tape when a clean, seamless finish matters, when a thinner construction is needed, or when a carrier film would interfere with the application. Film-carrier tapes offer more handling control and are better suited where dimensional stability or higher shear resistance is required.
When should I choose NF1634's high-tack formulation over standard acrylic transfer tapes?
Choose NF1634 when bonding to substrates with lower surface energy, textured surfaces, or where immediate grip is required without extended dwell time. Its higher tack provides faster bond development than standard acrylic formulations, reducing the time needed between tape application and handling in assembly.
Similar Products
NF1799PC
Perm/removable with PC liner; heavy-tack permanent side, residue-free removable side; for signage and reworkable assemblies.
NF1612PC
Acrylic transfer tape, no carrier, PC liner; tack builds over time; for industrial assembly.
NFIJ80
8 mil film with inkjet-receptive topcoat; for heavy-duty sign panels, display graphics, and applications requiring a rigid, dimensionally stable facestock.