NF1634PC
High-tack acrylic transfer adhesive on a 60# polycoated kraft liner — no film or fabric carrier. At 4.0 mil adhesive thickness and 110 oz/in peel, NF1634PC delivers aggressive initial tack for applications requiring immediate, high-strength contact on rough or irregular surfaces. Complies with 21 CFR 175.105. Application temperature down to 25°F. For industrial assembly, foam bonding, and gasket fabrication where high initial tack and gap-filling adhesive mass are required.
| Adhesive: | Acrylic |
- Foam & Textile Fabrication: Bonding foam and textile substrates with a high-tack 4.0 mil transfer adhesive providing gap-filling adhesive mass for irregular or porous surfaces; complies with 21 CFR 175.105 for food-contact packaging applications.
- Gaskets & Sealing: Die-cutting gasket profiles requiring high initial tack and 4.0 mil adhesive mass from a PC-liner transfer adhesive at 25°F application temperature.
- Industrial Assembly: Assembly bonding on rough or irregular surfaces where 4.0 mil adhesive thickness provides gap-filling contact; 25°F application temperature for cold-environment assembly.
- Laminating & Converting: High-tack converting with a 4.0 mil no-carrier transfer adhesive on PC liner; for laminating applications requiring aggressive initial contact on rough or textured substrate surfaces.
Are custom widths and short runs available?
Yes. Nova offers custom slit widths and welcomes short runs across the full product line. Most quotes are returned within 24–48 hours. Reach out today to discuss your specific requirements.
When should I use a transfer tape instead of a film-carrier tape?
Transfer tapes are adhesive-only — no carrier film — so the adhesive is invisible once the liner is removed. Use a transfer tape when a clean, seamless finish matters, when a thinner construction is needed, or when a carrier film would interfere with the application. Film-carrier tapes offer more handling control and are better suited where dimensional stability or higher shear resistance is required.
What does the PC liner add to NF1634PC compared to the standard-liner NF1634?
The PC liner on NF1634PC offers more dimensionally stable and consistent release force, which matters in precision die-cutting and automated dispensing. For hand-application or general use, NF1634 performs the same; choose NF1634PC when liner stability is critical to your process.
Similar Products
NF3410
Iridescent film with PSA on release liner; for decorative labeling, specialty packaging, and visual-effect applications.
NF1799PC
Perm/removable with PC liner; heavy-tack permanent side, residue-free removable side; for signage and reworkable assemblies.
NF1736PC
Acrylic perm/perm on a PET carrier with PC liner; higher-tack formulation for industrial assembly and foam bonding.